Humerus Nail Overview
The Humerus Nail is an orthopedic implant for the humerus, the long bone of the upper arm. Samis Instruments offers it in titanium or stainless steel. Diameters are 6.0 mm, 7.0 mm and 8.0 mm. Lengths are listed from 180 mm to 300 mm.
What Is a Humerus Nail?
A humeral nail is a rod-shaped implant. Surgeons place this type of implant inside the medullary canal, the hollow center of the bone. In general, humeral intramedullary nails support fracture fixation in the upper arm. However, the right implant depends on the surgeon’s assessment and the product’s documented intended use. This page does not give surgical instructions or treatment advice.
Humerus Nail Sizes
The size options are listed below. Please confirm the exact combination you need, as not every size and material pairing may be available.
- Diameters: 6.0 mm, 7.0 mm, 8.0 mm
- Lengths: 180 mm, 200 mm, 220 mm, 240 mm, 260 mm, 280 mm, 300 mm
Material Options
This humeral nail comes in titanium or stainless steel. Both materials are widely used in orthopedic implants. Material availability may vary by size, so please check before ordering.
Custom Sizes and Colors
Custom sizes and colors are available on request. Each request depends on confirmation of technical feasibility and applicable product requirements. For example, you can share the diameter, length and material you need. The team can then review the request.
Supply Information
Samis Instruments manufactures and supplies orthopedic products internationally to B2B and B2C customers. However, availability depends on the regulations of the destination country. Therefore, buyers should confirm local requirements before ordering.
Specifications table
| Specification | Detail |
|---|---|
| Product name | Humerus Nail |
| Diameters | 6.0 mm, 7.0 mm, 8.0 mm |
| Lengths | 180 mm, 200 mm, 220 mm, 240 mm, 260 mm, 280 mm, 300 mm |
| Materials | Titanium / Stainless Steel |
| Size and material combinations | Confirm availability before ordering |
| Customization | Custom sizes and colors on request, subject to confirmation of technical feasibility and applicable product requirements |
Product FAQs
What is a Humerus Nail?
A Humerus Nail is an orthopedic implant made for the humerus, the long bone of the upper arm. Surgeons place nails of this type inside the bone canal to help stabilize a fracture. Samis Instruments offers the Humerus Nail in titanium or stainless steel. Use and selection depend on professional assessment and the product’s documented intended use.
What is a humeral intramedullary nail used for?
A humeral intramedullary nail sits inside the medullary canal of the humerus. Published orthopedic literature discusses such nails for fixation of certain proximal humerus and humeral shaft fractures. However, the right use depends on the nail’s design, its documented intended use, and the treating surgeon’s assessment. Patients should discuss options with their surgeon.
What diameters and lengths are available?
The Humerus Nail comes in diameters of 6.0 mm, 7.0 mm and 8.0 mm. Available lengths are 180 mm, 200 mm, 220 mm, 240 mm, 260 mm, 280 mm and 300 mm. Not every diameter, length and material combination may be available, so please confirm the exact variant you need.
Is the Humerus Nail available in titanium and stainless steel?
Yes, the Humerus Nail is offered in titanium or stainless steel. Both are common implant materials in orthopedics. However, the options may not apply to every diameter and length. Please confirm the material and size combination you need with Samis Instruments before ordering.
How is the right humeral nail size chosen?
The treating surgeon chooses the humeral nail size. The surgeon assesses the patient’s bone anatomy, the fracture pattern and the product’s documented intended use. Imaging and pre-operative planning usually support this decision. Samis Instruments lists diameters and lengths for reference only and does not give surgical or treatment advice.
What is the difference between a humeral nail and a humerus plate?
A humeral nail sits inside the bone canal, while a humerus plate sits on the outer surface of the bone and uses screws for fixation. Research comparing the two for humeral shaft fractures shows mixed results, and the choice depends on the fracture and the surgeon’s judgment. The Humerus Nail is a nail, not a plate.
Can custom sizes and colors be requested?
Yes, you can request custom sizes and colors. Each request is subject to confirmation of technical feasibility and applicable product requirements. Custom options are not guaranteed. Please send the details you need, such as diameter, length and material, to Samis Instruments so the team can review the request.










Write a Review