Teale Uterine Vulsellum Forceps

Teale Uterine Vulsellum Forceps are toothed gynecology instruments intended for controlled grasping and handling during applicable obstetrical and gynecological procedures. The Teale pattern is generally recognized by its elongated profile and toothed working end, although the precise jaw shape, handle design, lock, and tooth arrangement can vary among manufacturers.

This product is manufactured from premium German stainless steel and is available in several lengths and teeth configurations. Buyers can select from standard production sizes or request a customized version based on confirmed technical requirements. Selection and use must be performed by appropriately trained healthcare professionals.

Design and Handling

The working end incorporates opposing teeth intended to engage tissue during professional gynecological procedures. Different teeth configurations allow the buyer to specify an instrument appropriate to the intended institutional or procedural requirement.

Teale forceps sold in the wider market frequently feature finger-ring handles, long shanks, a ratchet lock, and curved or curved-to-side jaws. These characteristics should not be assumed for every product bearing the Teale name. The exact jaw orientation, locking mechanism, handle configuration, and working-end dimensions must be confirmed against the selected Samis Instruments model before ordering.

Where these features are required, the buyer should specify:

• Straight, curved, angled, or curved-to-side working end.
• Required teeth configuration.
• Overall instrument length.
• Finger-ring or other required handle design.
• Ratchet or non-locking construction.
• Any required working-end width or jaw dimensions.

Available Teeth Configurations

The supplied range includes the following teeth options:

• 1×2 teeth: Available as a manufacturer-supplied configuration, subject to confirmation for the selected length.
• 2×3 teeth: Available according to the confirmed product specification.
• 3×4 teeth: A recognized Teale-pattern configuration, but less commonly supplied within this particular range.

Published surgical catalogues most frequently associate the Teale pattern with 3×4 teeth. Therefore, 1×2 and 2×3 versions should be displayed as manufacturer-specific options and supported by accurate product photographs or technical drawings. Availability of every teeth arrangement in every length should be confirmed before accepting an order.

Size Options

The available range extends from 15 cm to 25 cm:

• 15 cm (6 inches)
• 18 cm (7 inches)
• 20 cm (8 inches)
• 21.5 cm (8.5 inches)
• 23 cm (9 inches)
• 24 cm (9.5 inches)
• 25 cm (10 inches)

The commonly manufactured lengths in this range are 18 cm, 20 cm, and 23 cm. Other listed lengths remain available options, subject to the selected teeth configuration and final production confirmation.

When creating WooCommerce variations, each selectable length and teeth option should have accurate availability information. A combination should not appear as available unless it can actually be supplied.

Material and Construction

The instrument is manufactured from premium German stainless steel. This wording describes the specified material and must not be interpreted as a claim that the finished instrument is manufactured in Germany.

Stainless steel construction is suitable for professional instrument manufacturing and processing workflows appropriate to the confirmed product. No claim concerning a specific steel grade, hardness, corrosion resistance, certification, or regulatory approval should be published unless supporting documentation is available.

Typical Professional Application

Teale-pattern uterine vulsellum forceps are generally used in obstetrical and gynecological settings for controlled grasping and handling of the cervix or uterus during applicable procedures. The exact clinical application, instrument selection, handling method, and teeth pattern should be determined by a qualified healthcare professional according to the procedure and applicable institutional protocol.

This information identifies the instrument’s general professional category and does not constitute medical advice or claim a particular patient outcome.

Custom Manufacturing

Custom lengths and teeth configurations can be manufactured according to the buyer’s confirmed requirements. Buyers requesting customization should provide an approved sample, technical drawing, exact measurements, or clearly defined specifications.

Custom specifications should identify:

• Overall length.
• Teeth arrangement.
• Jaw shape and orientation.
• Working-end dimensions.
• Handle type.
• Locking requirements.
• Required marking or packaging details, where applicable.

Customized products should be separately identified on the quotation, product page, invoice, and Merchant Center feed if their specifications differ materially from the standard versions.

Ordering and Selection Information

Before ordering, confirm the required length, teeth configuration, jaw orientation, handle design, and locking mechanism. The 18 cm, 20 cm, and 23 cm lengths are the commonly manufactured sizes in the supplied range.

For variation accuracy, use a unique SKU or MPN for each physical configuration. Product images should show the actual teeth arrangement and instrument shape associated with the selected variation.

Care and Processing Note

The exact supplied condition—sterile or non-sterile—and reusable classification require confirmation for this product. Do not use the instrument before reviewing its packaging, labelling, instructions for use, and institutional processing requirements.

If the confirmed model is supplied non-sterile and reusable, it must be cleaned, disinfected, inspected, and sterilized before use and between procedures according to the manufacturer’s validated instructions and the healthcare facility’s established protocol. Do not publish a specific sterilization temperature or cycle unless it appears in validated processing instructions.

Important Professional-Use Disclaimer

This instrument is intended for selection and use by appropriately trained healthcare professionals. The appropriate pattern, size, teeth configuration, processing method, and procedural application must be determined by the responsible professional and healthcare facility.

Quality Assurance: Samis Instruments products are manufactured under ISO 13485 quality management standards and CE compliance guidelines, and are registered with the Sialkot Chamber of Commerce. View our certifications.