1. Product Introduction
The Pedicle Screw Fixation Set (Type II) brings together a comprehensive range of surgical instruments to support pedicle screw fixation and spinal fixation workflows. Starting from initial pedicle access and preparation, the set takes surgeons through measurement, screw handling, rod introduction, rod reduction and contouring, and final tightening — all within a single organized configuration.
In total, the set contains 23 listed components, organized across three perforated sterilization trays and finished with a Samis-branded container lid. As a result, hospitals, spine and orthopedic surgery departments, neurosurgical units, and medical device distributors can procure the full instrument range from a single source. Instruments are available in premium German stainless steel and titanium, subject to the selected configuration.
2. Key Features
- 23-component instrument configuration covering pedicle access, preparation, measurement, rod handling, reduction, and tightening
- Straight and curved pedicle awls (3 straight, 2 curved) for pedicle channel creation
- Cannulated instruments — cannulated pedicle taps, depth gauge, and T-handle for guided preparation and measurement
- Ball-tip pedicle probes for pedicle wall assessment during channel preparation
- Rod handling instruments — rod reducer/persuader, angled rod bender, and rod cutter for contouring and placement
- Reduction and tightening instruments — reduction forceps, ratchet wrench, T-handle wrench, hex/Allen wrench, and wire tensioner/nut tightener
- Blue-handled instrument group for visual identification during the procedure
- Perforated sterilization trays (×3) with Samis-branded container lid for organized storage and tray management
- Material options — premium German stainless steel or titanium, subject to configuration selected
3. Instrument Categories
Pedicle Access and Preparation
Five awls — three straight and two curved — address pedicle channel creation across different anatomical approaches. Next, four cannulated pedicle taps carry out thread preparation within the channel. In addition, two long ball-tip pedicle probes give the surgeon a means to check pedicle wall integrity during preparation before proceeding to screw placement.
Measurement and Screw Handling
One cannulated depth gauge handles screw-length measurement, while the cannulated T-handle works with the cannulated instruments during preparation. For screw insertion, the set provides three long-shaft hex screwdrivers. Furthermore, a blue-handled screwdriver and a blue-handled T-handle wrench cover additional handling and torquing tasks at this stage.
Rod Handling and Reduction
Two blue-handled rod reducers/persuaders seat the rod into the pedicle screw heads. Once the rod is in position, the angled rod bender shapes it as needed, and the rod cutter trims it to length. In addition, one set of reduction forceps helps align the screw heads during rod placement. Three large ball-tip probes with blue handles offer further instrument support throughout this stage.
Tightening and Instrument Control
For final assembly, the blue-handled ratchet wrench and blue-handled T-handle wrench drive the locking components. Two short hex/Allen wrenches handle set-screw engagement, and one wire tensioner/nut tightener completes the final locking step.
General Supporting Instruments
The blue-handled surgical mallet drives awl advancement and seating where needed. Similarly, needle-nose locking pliers give the surgeon controlled handling of small components. To complete this group, two small retractors and two ring forceps support tissue management and instrument handling throughout the procedure.
Organization and Storage
Three perforated sterilization trays organize the full instrument set for preparation, identification, and storage. One Samis-branded sterilization container lid closes and completes the tray configuration.
4. Complete Set Configuration
| Instrument | Qty |
|---|---|
| Pedicle Awl – Straight | 3 |
| Pedicle Awl – Curved | 2 |
| Cannulated Pedicle Tap | 4 |
| Ball-tip Pedicle Probe – Long | 2 |
| Depth Gauge – Cannulated | 1 |
| T-Handle – Cannulated | 1 |
| Hex Screwdriver – Long Shaft | 3 |
| Large Ball-tip Probe – Blue Handle | 3 |
| Rod Reducer / Persuader – Blue Handle | 2 |
| Screw Driver – Blue Handle | 2 |
| T-Handle Wrench – Blue Handle | 1 |
| Surgical Mallet – Blue Handle | 1 |
| Hex Key / Allen Wrench – Short | 2 |
| Rod Bender – Angled | 1 |
| Rod Cutter | 1 |
| Needle Nose Pliers – Locking | 1 |
| Ratchet Wrench – Blue Handle | 1 |
| Reduction Forceps – Pedicle Screw | 1 |
| Wire Tensioner / Nut Tightener | 1 |
| Retractor – Small | 2 |
| Ring Forceps | 2 |
| Perforated Sterilization Tray | 3 |
| Sterilization Container Lid – Samis Branded | 1 |
Total: 23 components
5. Materials and Finish
Instruments in this set are available in two material options:
- Premium German stainless steel — for durability and corrosion resistance in demanding surgical environments
- Titanium — for applications where a lightweight instrument option is preferred
Material options apply subject to the selected configuration, so please confirm your material requirement at the time of enquiry. Do not assume that every individual instrument in the set is available in both materials — always verify the specific configuration before ordering.
6. Applications
This spinal fixation instrument set covers the instrumentation workflows that pedicle screw fixation and posterior spinal instrumentation procedures require. Specifically, it addresses the full sequence of steps: pedicle channel access, cannulated preparation and tapping, depth measurement, screw placement, rod introduction, rod reduction, rod shaping and trimming, and final tightening and locking.
Qualified spine surgery, orthopedic surgery, and neurosurgical professionals working in appropriate clinical settings use the set. Note that it consists of reusable surgical instruments only — it does not include pedicle screws, spinal rods, or other implants. Therefore, buyers should confirm compatibility with their specific implant system before ordering.
7. Why This Set Is Relevant for Professional Buyers
Broad instrument scope. The 23-component configuration covers pedicle access, preparation, measurement, rod handling, reduction, and fixation. As a result, procurement teams do not need to source these instruments from multiple sets.
Multiple dedicated instruments in key categories. Five awls, four taps, three long-shaft hex screwdrivers, three ball-tip probes, and two rod reducers give each functional category more than one working instrument. This means the set offers genuine depth within each stage of the workflow.
Blue-handle instrument group. A distinct group of instruments has blue handles, so staff can identify them quickly within a busy tray environment.
Three-tray organization system. Three perforated sterilization trays hold the full set, and the Samis-branded container lid closes the configuration. Together, they support organized instrument layout, preparation, and storage.
Material choice. The set is available in both German stainless steel and titanium. Consequently, procurement teams can select the material that fits their departmental or institutional requirements.
Available for institutional procurement. Hospitals, surgical departments, distributors, and healthcare procurement teams can order this set directly. Enquiries about configuration, quantities, and specifications are welcome.
8. Product Specifications
| Specification | Detail |
|---|---|
| Product Name | Pedicle Screw Fixation Set (Type II) |
| Product Type | Spinal / pedicle screw fixation instrument set |
| Material | Premium German stainless steel / Titanium (subject to configuration) |
| Total Components | 23 |
| Trays | Perforated sterilization trays (×3) |
| Container | Samis-branded sterilization container lid (×1) |
| Intended Use | Reusable surgical instruments for professional use |
9. FAQ
Q1: What is the Pedicle Screw Fixation Set (Type II)? It is a 23-component surgical instrument set that covers pedicle screw fixation and spinal fixation workflows. Specifically, it addresses pedicle access and preparation, depth measurement, screw handling, rod introduction and reduction, rod shaping and cutting, and final tightening. The set sits in three perforated sterilization trays within a Samis-branded container.
Q2: What instruments does the set include? The set contains straight and curved pedicle awls, cannulated pedicle taps, ball-tip pedicle probes, a cannulated depth gauge, a cannulated T-handle, long-shaft hex screwdrivers, rod reducers/persuaders, a rod bender, a rod cutter, reduction forceps, a surgical mallet, a ratchet wrench, hex wrenches, a wire tensioner/nut tightener, needle-nose locking pliers, retractors, and ring forceps. It also includes three perforated sterilization trays and a Samis-branded container lid. See the full table above for exact quantities.
Q3: How many components does the set contain? The set contains 23 listed components in total.
Q4: What materials does Sami’s Instruments offer for this set? The set is available in premium German stainless steel and in titanium, subject to the configuration selected. Please state your material preference when you enquire.
Q5: Does every instrument in the set come in both stainless steel and titanium? Not necessarily. Material availability depends on the selected configuration. Before ordering, confirm your material requirements for each instrument rather than assuming both options apply to every item.
Q6: Does the set include implants? No. This set contains reusable surgical instruments only. It does not include pedicle screws, spinal rods, or other implants. Therefore, confirm compatibility with your specific implant system before placing an order.
Q7: How does the set organize for storage and transport? Three perforated sterilization trays hold all instruments, and a Samis-branded sterilization container lid closes the configuration for storage and transport.
3 Verified Customer Reviews for Pedicle Screw Fixation Set (Type II)
Complete and reliable system for spinal fixation. Great performance in complex procedures.
Pedicle Screw Fixation Set (Type II)
I am very satisfied with this set.Smooth handling improves efficiency in the operating room.Strong and durable instruments for long-term use.On-time delivery and professional packaging.
Pedicle Screw Fixation Set (Type II)
This set is outstanding! The ergonomic design reduces hand fatigue during long procedures, and every tool fits perfectly. I received my order very quickly, which allowed me to use it immediately in surgery. Highly recommended for orthopedic specialists.
Pedicle Screw Fixation Set (Type II)
ISO, CNC, Chamber of Commerce & Surgical Instruments Manufacturers Association Certification Images – Sami’s Instruments
Write a Review